/* * Copyright (c) 2023, Texas Instruments Incorporated - http://www.ti.com * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * ============ ti_msp_dl_config.h ============= * Configured MSPM0 DriverLib module declarations * * DO NOT EDIT - This file is generated for the MSPM0G350X * by the SysConfig tool. */ #ifndef ti_msp_dl_config_h #define ti_msp_dl_config_h #define CONFIG_MSPM0G350X #define CONFIG_MSPM0G3507 #if defined(__ti_version__) || defined(__TI_COMPILER_VERSION__) #define SYSCONFIG_WEAK __attribute__((weak)) #elif defined(__IAR_SYSTEMS_ICC__) #define SYSCONFIG_WEAK __weak #elif defined(__GNUC__) #define SYSCONFIG_WEAK __attribute__((weak)) #endif #include #include #include #ifdef __cplusplus extern "C" { #endif /* * ======== SYSCFG_DL_init ======== * Perform all required MSP DL initialization * * This function should be called once at a point before any use of * MSP DL. */ /* clang-format off */ #define POWER_STARTUP_DELAY (16) #define GPIO_HFXT_PORT GPIOA #define GPIO_HFXIN_PIN DL_GPIO_PIN_5 #define GPIO_HFXIN_IOMUX (IOMUX_PINCM10) #define GPIO_HFXOUT_PIN DL_GPIO_PIN_6 #define GPIO_HFXOUT_IOMUX (IOMUX_PINCM11) #define GPIO_LFXT_PORT GPIOA #define GPIO_LFXIN_PIN DL_GPIO_PIN_3 #define GPIO_LFXIN_IOMUX (IOMUX_PINCM8) #define GPIO_LFXOUT_PIN DL_GPIO_PIN_4 #define GPIO_LFXOUT_IOMUX (IOMUX_PINCM9) #define CPUCLK_FREQ 80000000 /* Defines for QEI_0 */ #define QEI_0_INST TIMG8 #define QEI_0_INST_IRQHandler TIMG8_IRQHandler #define QEI_0_INST_INT_IRQN (TIMG8_INT_IRQn) /* Pin configuration defines for QEI_0 PHA Pin */ #define GPIO_QEI_0_PHA_PORT GPIOB #define GPIO_QEI_0_PHA_PIN DL_GPIO_PIN_6 #define GPIO_QEI_0_PHA_IOMUX (IOMUX_PINCM23) #define GPIO_QEI_0_PHA_IOMUX_FUNC IOMUX_PINCM23_PF_TIMG8_CCP0 /* Pin configuration defines for QEI_0 PHB Pin */ #define GPIO_QEI_0_PHB_PORT GPIOB #define GPIO_QEI_0_PHB_PIN DL_GPIO_PIN_7 #define GPIO_QEI_0_PHB_IOMUX (IOMUX_PINCM24) #define GPIO_QEI_0_PHB_IOMUX_FUNC IOMUX_PINCM24_PF_TIMG8_CCP1 /* Defines for VREF */ #define VREF_VOLTAGE_MV 3300 #define GPIO_VREF_VREFPOS_PORT GPIOA #define GPIO_VREF_VREFPOS_PIN DL_GPIO_PIN_23 #define GPIO_VREF_IOMUX_VREFPOS (IOMUX_PINCM53) #define GPIO_VREF_IOMUX_VREFPOS_FUNC IOMUX_PINCM53_PF_UNCONNECTED #define GPIO_VREF_VREFNEG_PORT GPIOA #define GPIO_VREF_VREFNEG_PIN DL_GPIO_PIN_21 #define GPIO_VREF_IOMUX_VREFNEG (IOMUX_PINCM46) #define GPIO_VREF_IOMUX_VREFNEG_FUNC IOMUX_PINCM46_PF_UNCONNECTED /* Port definition for Pin Group LED_A14 */ #define LED_A14_PORT (GPIOA) /* Defines for PIN_14: GPIOA.14 with pinCMx 36 on package pin 7 */ #define LED_A14_PIN_14_PIN (DL_GPIO_PIN_14) #define LED_A14_PIN_14_IOMUX (IOMUX_PINCM36) /* Port definition for Pin Group KEY_BSL */ #define KEY_BSL_PORT (GPIOA) /* Defines for PIN_18: GPIOA.18 with pinCMx 40 on package pin 11 */ // pins affected by this interrupt request:["PIN_18"] #define KEY_BSL_INT_IRQN (GPIOA_INT_IRQn) #define KEY_BSL_INT_IIDX (DL_INTERRUPT_GROUP1_IIDX_GPIOA) #define KEY_BSL_PIN_18_IIDX (DL_GPIO_IIDX_DIO18) #define KEY_BSL_PIN_18_PIN (DL_GPIO_PIN_18) #define KEY_BSL_PIN_18_IOMUX (IOMUX_PINCM40) /* clang-format on */ void SYSCFG_DL_init(void); void SYSCFG_DL_initPower(void); void SYSCFG_DL_GPIO_init(void); void SYSCFG_DL_SYSCTL_init(void); void SYSCFG_DL_QEI_0_init(void); void SYSCFG_DL_VREF_init(void); void SYSCFG_DL_SYSTICK_init(void); bool SYSCFG_DL_saveConfiguration(void); bool SYSCFG_DL_restoreConfiguration(void); #ifdef __cplusplus } #endif #endif /* ti_msp_dl_config_h */