SkyLi
130 lines
5.4 KiB
Plaintext
130 lines
5.4 KiB
Plaintext
/**
|
|
* These arguments were used when this file was generated. They will be automatically applied on subsequent loads
|
|
* via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
|
|
* @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-64(PM)" --product "mspm0_sdk@2.04.00.06"
|
|
* @v2CliArgs --device "MSPM0G3507" --package "LQFP-64(PM)" --product "mspm0_sdk@2.04.00.06"
|
|
* @versions {"tool":"1.23.1+4034"}
|
|
*/
|
|
scripting.excludeFromBuild("device_linker.cmd");
|
|
scripting.excludeFromBuild("device_linker.lds");
|
|
scripting.excludeFromBuild("device.opt");
|
|
scripting.excludeFromBuild("device.cmd.genlibs");
|
|
scripting.excludeFromBuild("device.lds.genlibs");
|
|
scripting.excludeFromBuild("Event.dot");
|
|
|
|
/**
|
|
* Import the modules used in this configuration.
|
|
*/
|
|
const GPIO = scripting.addModule("/ti/driverlib/GPIO", {}, false);
|
|
const GPIO1 = GPIO.addInstance();
|
|
const GPIO2 = GPIO.addInstance();
|
|
const QEI = scripting.addModule("/ti/driverlib/QEI", {}, false);
|
|
const QEI1 = QEI.addInstance();
|
|
const SYSCTL = scripting.addModule("/ti/driverlib/SYSCTL");
|
|
const SYSTICK = scripting.addModule("/ti/driverlib/SYSTICK");
|
|
const VREF = scripting.addModule("/ti/driverlib/VREF");
|
|
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig");
|
|
|
|
/**
|
|
* Write custom configuration values to the imported modules.
|
|
*/
|
|
const divider2 = system.clockTree["HFCLK4MFPCLKDIV"];
|
|
divider2.divideValue = 10;
|
|
|
|
const divider9 = system.clockTree["UDIV"];
|
|
divider9.divideValue = 2;
|
|
|
|
const gate7 = system.clockTree["MFCLKGATE"];
|
|
gate7.enable = true;
|
|
|
|
const gate8 = system.clockTree["MFPCLKGATE"];
|
|
gate8.enable = true;
|
|
|
|
const multiplier2 = system.clockTree["PLL_QDIV"];
|
|
multiplier2.multiplyValue = 4;
|
|
|
|
const mux4 = system.clockTree["EXHFMUX"];
|
|
mux4.inputSelect = "EXHFMUX_XTAL";
|
|
|
|
const mux5 = system.clockTree["EXLFMUX"];
|
|
mux5.inputSelect = "EXLFMUX_XTAL";
|
|
|
|
const mux8 = system.clockTree["HSCLKMUX"];
|
|
mux8.inputSelect = "HSCLKMUX_SYSPLL0";
|
|
|
|
const mux9 = system.clockTree["LFXTMUX"];
|
|
mux9.inputSelect = "LFXTMUX_TRUE";
|
|
|
|
const mux12 = system.clockTree["SYSPLLMUX"];
|
|
mux12.inputSelect = "zSYSPLLMUX_HFCLK";
|
|
|
|
const pinFunction4 = system.clockTree["HFXT"];
|
|
pinFunction4.inputFreq = 40;
|
|
pinFunction4.enable = true;
|
|
|
|
const pinFunction6 = system.clockTree["LFXT"];
|
|
pinFunction6.inputFreq = 32.768;
|
|
pinFunction6.enable = true;
|
|
pinFunction6.peripheral.$assign = "SYSCTL";
|
|
pinFunction6.peripheral.lfxInPin.$assign = "PA3";
|
|
pinFunction6.peripheral.lfxOutPin.$assign = "PA4";
|
|
|
|
GPIO1.port = "PORTA";
|
|
GPIO1.$name = "LED_A14";
|
|
GPIO1.associatedPins[0].internalResistor = "PULL_DOWN";
|
|
GPIO1.associatedPins[0].$name = "PIN_14";
|
|
GPIO1.associatedPins[0].assignedPin = "14";
|
|
GPIO1.associatedPins[0].pin.$assign = "PA14";
|
|
|
|
const Board = scripting.addModule("/ti/driverlib/Board", {}, false);
|
|
|
|
GPIO2.port = "PORTA";
|
|
GPIO2.$name = "KEY_BSL";
|
|
GPIO2.associatedPins[0].$name = "PIN_18";
|
|
GPIO2.associatedPins[0].direction = "INPUT";
|
|
GPIO2.associatedPins[0].assignedPin = "18";
|
|
GPIO2.associatedPins[0].internalResistor = "PULL_DOWN";
|
|
GPIO2.associatedPins[0].interruptEn = true;
|
|
GPIO2.associatedPins[0].polarity = "RISE";
|
|
GPIO2.associatedPins[0].pin.$assign = "PA18";
|
|
|
|
QEI1.$name = "QEI_0";
|
|
QEI1.peripheral.$assign = "TIMG8";
|
|
QEI1.peripheral.ccp0Pin.$assign = "PB6";
|
|
QEI1.peripheral.ccp1Pin.$assign = "PB7";
|
|
QEI1.ccp0PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric0";
|
|
QEI1.ccp1PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric1";
|
|
|
|
SYSCTL.forceDefaultClkConfig = true;
|
|
SYSCTL.clockTreeEn = true;
|
|
scripting.suppress("For best practices when the CPUCLK is running at 32MHz and above, clear the flash status bit using DL_FlashCTL_executeClearStatus\\(\\) before executing any flash operation\\. Otherwise there may be false positives\\.", SYSCTL);
|
|
|
|
SYSTICK.periodEnable = true;
|
|
SYSTICK.interruptPriority = "0";
|
|
SYSTICK.systickEnable = true;
|
|
SYSTICK.period = 80;
|
|
|
|
VREF.basicVrefPins = "VREF+-";
|
|
VREF.basicIntVolt = "DL_VREF_BUFCONFIG_OUTPUT_2_5V";
|
|
VREF.basicMode = "DL_VREF_ENABLE_DISABLE";
|
|
VREF.basicExtVolt = 3.3;
|
|
VREF.vrefPosPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric29";
|
|
VREF.peripheral.$assign = "VREF";
|
|
VREF.peripheral.vrefPosPin.$assign = "PA23";
|
|
VREF.peripheral.vrefNegPin.$assign = "PA21";
|
|
VREF.vrefNegPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric30";
|
|
|
|
ProjectConfig.genLibIQVersion = "MATHACL";
|
|
|
|
/**
|
|
* Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
|
|
* version of the tool will not impact the pinmux you originally saw. These lines can be completely deleted in order to
|
|
* re-solve from scratch.
|
|
*/
|
|
pinFunction4.peripheral.$suggestSolution = "SYSCTL";
|
|
pinFunction4.peripheral.hfxInPin.$suggestSolution = "PA5";
|
|
pinFunction4.peripheral.hfxOutPin.$suggestSolution = "PA6";
|
|
Board.peripheral.$suggestSolution = "DEBUGSS";
|
|
Board.peripheral.swclkPin.$suggestSolution = "PA20";
|
|
Board.peripheral.swdioPin.$suggestSolution = "PA19";
|