Manual mode now receives angular velocity (degrees/s) via 0xA6 frame instead of
absolute angle reference. The firmware integrates velocity * dt into gimbal angle ref.
Motors are no longer auto-enabled at DMMotorInit — they stay disabled until a mode
switch out of DEBUG. Extract ROBOT_CMD_DELAY macro to replace magic number.
Fix "volity" typo → "velocity" and update docs/protocol comments accordingly.
- Add DEBUG mode (parallel to AUTO/MANUAL) for real-time PID parameter tuning
- New 0xA8 debug frame: 12 floats for vision/motor angle PID tuning params
- DMMotorSetMode: send zero-velocity before disable, clear PID to prevent jumps
- motor_enable topic: pub from robot_cmd, sub in gimbal, controls motor on/off
- motor_pid topic: pub from robot_cmd, sub in gimbal, updates motor angle PID
- Rename DM motor enums (DM_CMD_ENABLE_MODE/DISABLE_MODE, DM_Motor_Ctrl_Mode_e)
- SwitchToAuto/Manual: re-enable motors when switching back from DEBUG mode
- Static-allocate enable_msg/pid_tune in GimbalTask to avoid stack churn
- Add docs/host_comm_guide.md with Python Tkinter tuning GUI example
- Remove ARCHITECTURE.md
- DM motor send functions now fill txconf.Identifier from tx_id before CANTransmit
(MIT=tid, PosVel=tid+0x100, Velocity=tid+0x200, SetMode=tid)
- Enable motor task with stack size 1024 1000Hz
- Increase FDCAN1 StdFiltersNbr from 1 to 14
- Comment out INS temperature log, DM error handling and PID for testing
- Remove test_robot_cmd.c
SkyLiCoder